1. For large gaps (>0.4 mm) or where maximum cure speed is required then treatment of both surfaces is recommended.
2. The activator will not dry and will remain active for up to 6 hours. Bond assembly should be completed within this time.
3. Where adhesive is applied onto an activated surface, assembly should be completed as quickly as possible (within 15seconds).
4. Secure the assembly and await fixturing before any further handling.
LOCTITE® SF 7240™ is designed to promote the curing speed of LOCTITE® anaerobic adhesives and sealants, without significant loss of joint strength. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps. This product should also be used when cure temperature is low and
