For Assembly
1. For best results, clean all surfaces (external and internal) with a LOCTITE® cleaning solvent and allow to dry.
2. If the cure speed is too slow, use appropriate activator. Please see the Cure Speed vs. Activator graph for reference. Allow the activator to dry when needed.
3. To prevent the product from clogging in the nozzle, do not allow the tip to touch metal surfaces during application.
4. For Thru Holes, apply several drops of the product onto the bolt at the nut engagement area.
5. For Blind Holes, apply several drops of the product to the lower third of the internal threads in the blind hole, or the bottom of the blind hole.
6. For Sealing Applications, apply a 360° bead of product to the leading threads of the male fitting, leaving the first thread free. For bigger threads and voids, adjust product amount accordingly and apply a 360° bead of product on the female threads also.
7. Assemble and tighten as required.
LOCTITE® 270 is a high-strength threadlocker for most efficacy in the securing and sealing of bolts, nuts and studs to stop loosening due to vibration. The product serves to completely lock assemblies which need to no longer come loose. It works on all metals, inclusive of passive substrates such as stainless steel, aluminum and plated surfaces. It is demonstrated to be tolerant of minor illness due to industrial oils, e.g. motor oils, corrosion prevention oils and reducing fluids. Can be disassembled via heating to 300°C.
