Directions for use: For Assembly
1. For best results, clean all surfaces (external and internal) with a LOCTITE® cleaning solvent and allow to dry.
2. If the material is an inactive metal or the cure speed is too slow, spray with Activator 7471™ or 7649™ and allow to dry.
3. For Slip Fitted Assemblies, apply adhesive around the leading edge of the pin and the inside of the collar and use a rotating motion during assembly to ensure good coverage.
4. For Press Fitted Assemblies, apply adhesive thoroughly to both bond surfaces and assemble at high press on rates.
5. For Shrink Fitted Assemblies the adhesive should be coated onto the pin, the collar should then be heated to create sufficient clearance for free assembly.
6. Parts should not be disturbed until sufficient handling strength is achieved.
7. Allow a minimum of 3 days cure after application, before testing disassembly forces.
Loctite Methacrylate ester acrylic holding compound available at Coimbatore. Its lubricating residences facilitate meeting when heavy interference or excessive torque values are used.
LOCTITE® 232 is a brown, opaque, methacrylate ester acrylic holding compound. Its lubricating homes facilitate meeting when heavy interference or excessive torque values are utilized. It prevents galling and pick-up throughout disassembly and eliminates corrosion inside the joints whilst growing dismounting forces. Typically used for exceptionally torqued threaded assemblies and heavy press fits.
