Application :
1. Caution: Do not apply to surfaces above 66 °C (150 °F)
2. Apply to clean and dry surface for best strength. LOCTITE EA 3463 can be applied to wet surfaces, but bond strength will be lower.
3. For maximum adhesion, clean and sand surface.
4. Cut required amount of material from stick. Remove clear plastic wrapper from cut section.
5. To mix, first twist the material to produce a spiral pattern of resin and hardener. Next, knead material for 2 to 3 minutes or until a uniform color is achieved.
6. Firmly apply for patch, repair or bonding.
7. For a smooth finish, wet a cloth or gloved finger with water and smooth.
LOCTITE® EA 3463 is a two component steel filled epoxy resin system. It is ideal for restoring metal parts worn by mechanical and/or corrosion. It is applied like a putty and when cured it has a high compressive strength and good adhesion to most surfaces. Typical applications include stopping leaks in pipes and tanks, filling oversized bolt holes, smoothing welds, and repairing non-structural defects in castings holes in tanks.
