Directions For Use: For Assembly
1. For best results, clean all surfaces (external and internal) with a LOCTITE® cleaning solvent and allow to dry.
2. If the material is an inactive metal or the cure speed is too slow, spray all threads with primer and allow to dry.
3. To prevent the product from clogging in the nozzle, do not allow the tip to touch metal surfaces during application.
4. For Thru Holes, apply several drops of the product onto the bolt at the nut engagement area.
5. For Blind Holes, apply several drops of the product down the internal threads to the bottom of the hole.
6. For Sealing Applications, apply a 360° bead of product to the leading threads of the male fitting, leaving the first thread free. Force the material into the threads to thoroughly fill the voids. For bigger threads and voids, adjust product amount accordingly and apply a 360° bead of product on the female threads also.
7. Assemble and tighten as required.
LOCTITE® 2701 is a green, low viscosity, methacrylate-based threadlocking adhesive with excessive strength, specifically for chromated surfaces. Steel fixture time of 10 min, brass four min and stainless metal 25 min. Tolerates mild contaminations of industrial oils. Suitable for all metallic fasteners. Fluoresces underneath UV light.