Directions for use :
1. For best performance bond surfaces should be clean and free from grease.
2. Full performance properties will develop over 24 hours.
3. Moisture curing begins immediately after the product is exposed to the atmosphere, therefore parts to be assembled should be mated within a few minutes after the product is dispensed.
4. Press or firmly clamp parts together. Do not slide parts together.
5. Excess material can be easily wiped away with non-polar solvents.
6. Excess cured material can be removed with a knife or single edge razor blade.
NOTE: Do not use LOCTITE® SI 596 RED for gasketing carburetors or fuel control devices where it will be in constant contact with hydrocarbon fuels. Material will develop excessive swell and loss of mechanical properties.
LOCTITE® SI 596 is a red, 1-part, flowable smooth, acetoxy silicone paste sealant. It types a tough, flexible, waterproof, oil-resistant silicone rubber bond. It is additionally used as a sealant and adhesive in industrial furnaces, ovens, boilers, exhaust stacks, excessive temperature ducting and heating factors in electrical appliances.
Typically used in functions with an working vary of -50°C to +250°C
