1. Wipe surfaces when still wet with a clean cloth to remove all heavy contamination. If necessary, spray surfaces again to allow run-off of product
2. Repeat cleaning process if necessary
3. Allow LOCTITE® SF 7070 to fully evaporate from parts prior to bonding to avoid solvent entrapment within the bond joint
4. Apply the Loctite® adhesive immediately after drying and assemble bond
LOCTITE® SF 7070 is a non-aqueous, hydrocarbon based, non-CFC solvent designed for cleaning and degreasing of surfaces to be bonded with LOCTITE® adhesivesThe product is used as a final pre-assembly cleaning treatment to remove most greases, oils, lubrication fluids, metal cuttings and fines from surfaces to be bondedIt is designed to be used as a spray or in immersion cleaning processes at room temperature or heated
