Directions for use:
1. For best performance bond surfaces should be clean and free from grease.
2. To ensure a fast and reliable cure, Activator 7387™ should be applied to one of the bond surfaces and the adhesive to the other surface. Parts should be assembled within 15 minutes.
3. The recommended bondline gap is 0.1 mm. Where bond gaps are large (up to a maximum of 0.5 mm), or faster cure speed is required, Activator 7387™ should be applied to both surfaces. Parts should be assembled immediately (within 1 minute).
4. Excess adhesive can be wiped away with organic solvent.
5. Bond should be held clamped until adhesive has fixtured.
6. Product should be allowed to develop full strength before subjecting to any service loads (typically 24 to 72 hours after assembly, depending on bond gap, materials and ambient conditions).
Loctite 603 Retaining Compound – excessive strength available in Coimbatore. Ideal for bearings. For use on close-fitting cylindrical parts. High oil tolerance. LOCTITE® 603 is a high-strength conserving compound. Designed for the bonding of cylindrical becoming parts, specifically for sintered bearings and additionally the place constantly easy surfaces can’t be assured. The product therapies when restrained in the absence of air between close-fitting metallic surfaces and prevents loosening and leakage due to shock and vibration. It has a excessive oil tolerance.
