1. After activation, parts should be bonded within 2- hours. Contamination of the surface before bonding should be prevented. 2. Apply the Loctite anaerobic product to the unactivated surface and assemble parts immediately. 3. Where possible, move surfaces in relation to each other for a few seconds on assembly to properly distribute the adhesive and for maximum activation.. 4. Secure the assembly and await fixturing before any further handling..
LOCTITE® SF 7075™ is used where increased cure speed of LOCTITE® anaerobic structural products is required. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps.
