Registered Address No 15, Kunnan Street, Kattoor, Coimbatore 641009
Directions for use :
1. For best performance bond surfaces should be clean and free from grease.
2. The product is designed for close fitting flanged parts with gaps up to 0.25 mm ( in).
3. Apply manually as a continuous bead, a rolled film or by screen printing to one surface of the flanges. For gaps greater than 0.125mm (0.005 in) using a pen roller, a rolled film should be applied to both flange surfaces.
4. Low pressures (<0.05 MPa, psi) may be used when testing to confirm a complete seal immediately after assembly and before curing.
5. Flanges should be tightened as soon as possible after assembly to avoid shimming.
LOCTITE® 510 is a excessive temperature resistant anaerobic sealant which therapies when restrained in the absence of air between close-fitting metallic surfaces. Typical purposes encompass sealing inflexible flange faces on transmissions and engine casings. It ensures an instant, low-pressure seal. The product will increase the torque potential of assembled flanges.
For metallic flanges
No specifications available for this product.
No FAQs available for this product.
